Promend Bicycle Phone Holder SJJ-299
$15.00
Promend Bicycle Phone Holder can be put on the bicycle handle, GM handlebar, and on the motorcycle rearview mirror.
It is strong and durable with four claws at each corner to hold the phone firmly during bumpy rides. The product can rotate 360 degrees and allow u to tilt to the angle of your liking.
There is also a shock-absorbing patch at each of the claws to prevent the phone from being in contact with the holder and falling off.
Its strong and durable aluminium frame gives your mobile the best protections from Anti-fall and Anti-shake.
* Handlebar Type Only
Description
Additional information
Material | Aluminium Alloy |
---|---|
Weight | 115 g |
Color | Black, Gold, Silver, Titanium |
Fit size | 2-3.9 inch |
This phone holder was slightly above average in quality. 1st issue was the bolts provided; they were much too long when the holder was attached to the bicycle handle bars with more than 10mm of screw exposed out from the bottom end which can result in potential injury. There should be an option for bolt length regarding bicycle or motorcycle handlebar sizes). 2nd issue were the weak adhesives used on the rubber bumpers. The double sided tape adhesive came off overnight and although I pressed them back, they repeatedly came off again. I finally used super glue to stick the bumpers on and they had stayed on ever since. 3rd, the holder plates made noise if no phone was installed during a ride due to the slightly loose fitting of both halves. If a phone was installed or the holder was tightened all the way back, then no noise issues. I guess this can be expected at this price range/bracket. A plus side; the unit I received had the bolt screw downward(which is easier to install) compared to the picture provided which had the bolts screw from bottom up. Overall I would give this product 3.5 stars.